Home > Products > Wet Wire Drawing Machine

Various wet wire drawing machine for particular usage

Compared with straight line wire drawing machine, wet wire drawing machine has two notable characteristics. First, in the drawing process, there are varying degrees of relative sliding between the drawing wire and the spool (except finished spool). Second, when the wet wire drawing machine is in operation, wire, spool and wire drawing die are immersed in or be sprayed by cooling lubricating fluid.

Wet wire drawing machine has a broad market for its compact structure, small footprint and high drawing-intensive as well as no torsion in its running time. It is well suited for high speed drawing for good conditions of cooling and lubricating of drawing wires.

While in the drawing process, the relative sliding of drawing wire and the surface of spool consumes much power and abrasive wear of spool surface. Owing to the structure restriction of this wire drawing machine, it is more suitable for drawing wires of smaller diameters.

Wet wire drawing machine is available for drawing mild steel, carbon steel, stainless steel, copper, aluminum and alloys.

Sever types of wet wire drawing machines are provided and each of them has its own features. You can select the right one according to your particular conditions.

  1. 25 Dies wet wire drawing machine
  2. Turnover type wet wire drawing machine
  3. High-speed wet wire drawing machine

25 Dies wet wire drawing machine

Main technical parameters:

  1. Inlet diameter: Φ 0.9-2.0mm
  2. Inlet strength: 1350MPa
  3. Outlet diameter: Φ 0.15-0.41mm
  4. drawing passes: 25; average unit pressure: 13%
  5. Max drawing speed: 25m/s
  6. Motor power: tank - 37KW AC inverter motor and spool -  5.5KW
  7. Cone pulley: monolithic assembly, surface coating - tungsten carbide , HRC58-62
  8. Transmission Type: synchronous belt

Application
Available for mild, medium and high carbon steel.
25 Dies Wet wire drawing machine for fine wires

 

Turnover type wet wire drawing machine

Applied in drawing rope steel wire, steel rod, galvanized zinc iron wire, silicon slice saw wire, etc.

Technical parameters:

Item LT21/275 LT23/280 LT25/230
Drawing drafts 21drafts 23drafts 25drafts
Max.inlet diameter Φ1.80mm Φ1.50mm Φ1.50mm
Min.outlet diameter Φ0.25mm Φ0.10mm Φ0.10mm
Drawing speed 20m/s 20m/s 20m/s
Motor power 22KW 18.5-30KW 18.5-30KW
Inlet wire tensile strength ≤1250Mpa
Transmission mode Timing belt, AC frequency inverter control speed
Capstan production chart Supersonic spray with WC, service life: 22000 hours
Cooling system Capstan submerged in lubrication and cooling, tractor is hollow, recyclable water cooling inside, be suitable to high speed drawing.
Tensile strength system Consist with tight and loose pulley, tensile cylinder is adjustable.
Arrange wire device Ball screw, driven by frequency inverter motor or servo motor, realize precision lay wire and flat arrange wire.
Steel wire linearity Design and assemble all kinds of straightener, coil diameter of finished wire is stable and adjustable.
Take up mode I-spooler take-up
Control mode AC frequency invert + PLC + man-machine interface + constant, complete digital logic control
Drawing materials Rope steel wire, steel rod, galvanized zinc iron wire, silicon slice saw wire, etc.

Turnover type wet wire drawing machine, drawing speed 20m/s

 

High-speed wet wire drawing machine

Characteristics:

  1. Innovation design and rational manufacturing process insures no leak in 3 years.
  2. Box type welding machine structure, safety and beauty, insure high speed drawing reliable and stable.
  3. Complete digital logic control, man-machine communication, status display, information service, etc.
  4. Tension spooling and meter precision make steel wire better linearity.
  5. Special design and control, satisfied with all kinds of I-spooler take up wire.

Parameters:

Item LT17/350 LT17/300 LT19/250 LT25/200
Drawing drafts 1 + 17drafts 1 + 17drafts 1 + 19drafts 25drafts
Max.inlet wire diameter Φ3.5mm Φ3.0mm Φ2.2mm Φ1.00mm
Min.outlet wire diameter Φ0.8mm Φ0.65mm Φ0.3mm Φ0.10mm
Drawing speed 10m/s 12m/s 16m/s 20m/s
Motor power 6-55KW 4-55KW 22-30KW 15-22KW
Inlet wire tensile strength ≤1250Mpa
Transmission mode Timing belt and powerful narrow belt, AC frequency inverter control speed
Capstan production chart Supersonic spray with WC, axiality´╝ť0.025 using life 22000 hour.
Cooling system Capstan submerged in lubrication and cooling, tractor is hollow, recyclable water cooling inside, be suitable to high speed drawing.
Tensile strength system Consist with tight and loose pulley, tensile cylinder is adjustable, and assemble double color protect cover.
Arrange wire device Ball screw, driven by frequency inverter motor or servo motor, realize precision lay wire and flat arrange wire.
Steel wire linearity Design and assemble all kinds of straightener, coil diameter of finished wire is stable and adjustable, slove twisting problem.
Take up mode I-spooler take up
Control mode AC frequency invert + PLC + man machine interface + constant, complete digital logic control

High-speed wet wire drawing machine, min outlet diameter 0.1 - 0.8mm

 

If you need to consult the price, please contact the business department by E-mail:

sales@wiredrawingmachine.org

When you contact us, please provide your detail requirements.
That will help us give you a valid quotation.